LED Strip

Depending on your project, you might want to use a 12V or 24V LED system. Here is our guide to show you which one is best for your next low-voltage lighting design.

When to use 24V vs. 12V LED strips?

The 12V vs. 24V lighting systems debate has been out there for a long time, and this is irrelevant to LED color options or the white color temperature.

The difference between 12V and 24V LED strip types available on the market is significant, but one of the most important decisions you’ll need to make is whether to go with a 12V or 24V strip for your low-voltage lighting project. Here are the main considerations when choosing your LED Strips.

The maximum run length for LED strips, whether they are 12 volts or 24 volts, depends on several factors such as the power consumption of the LED strip, the wire gauge used, and the voltage drop allowed.

Here are some general guidelines:

  1. Voltage Drop: Voltage drop occurs as electrical current travels through a conductor (such as wires) and is influenced by the length of the run and the gauge of the wire. Longer runs and smaller wire gauges result in higher voltage drops.

  2. Power Consumption: LED strips have a specified power consumption per unit length, typically expressed in watts per foot or meter. This information is crucial for determining the maximum run length.

  3. Wire Gauge: The wire gauge (thickness) used for the connections affects the voltage drop. Thicker wires have lower resistance and thus lower voltage drop.

  4. Voltage Regulation: Some LED strips come with voltage regulation features that help maintain a consistent brightness level even if there is a voltage drop.

As a rule of thumb, it’s advisable to consult the manufacturer’s specifications for the LED strip and follow their guidelines for maximum run lengths. Generally, for both 12V and 24V LED strips, it’s common to see maximum run lengths ranging from 16 to 32 feet (5 to 10 meters) without any additional measures.

If longer runs are needed, you might need to use additional power supplies or amplifiers, or you may need to consider using a higher voltage LED strip, as higher voltage allows for longer runs with less voltage drop.

Always follow the manufacturer’s recommendations and guidelines for the specific LED strip you are using to ensure optimal performance and safety. If in doubt, consult with a qualified electrician or the manufacturer for specific advice based on your installation requirements.

Leave a Comment

Your email address will not be published.